JIH-30 D Type - Sawing Machine Series

Products Description


  1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation.
  2. Concealed saw blade performs upward cutting. Single or multiple work pieces can be cut simultaneously.
  3. While cutting, the oil mist splashes automatically for cooling and lubrication.
  4. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
  5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
  6. The machine permits 90 and 45 degree cutting.


  1. Clamping system is controlled by an independent air cylinder.
  2. Clamping system moves on linear guide way, that assures stable clamping
Features :
  1. The clamping speed and cutting speed can be adjusted according achieve superior cutting performance (Fast and stable cutting). /clamps work pieces securely.
  2. Clamping pressure can be adjusted as desired to suit work piece t on the work piece due to over-pressure. to work piece type to The clamping system ype, that avoids damage.

  1. Adjustable clamping height.
  2. Adjustable clamping speed.
  3. Adjustable cutting height.
  4. Adjustable cutting speed.
    The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.
  5. push-pull type safety guard.
  6. Horizontal clamping for extremely stable clamping.
  7. .Accurately controlled oil mist system. greatly improves lubrication and cooling effect, while reducing trouble to a minimum.

  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those A typed machine
  2. Chip Outlet Port
    The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blad.
Products Specification

Suitable For Cutting Various Materials

Aluminum, brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment

30" saw blade x 1pcs、replace saw blade tool

Optional:•CE Standard•Infeed, Outfeed Roller Table•Chip Collector•Horizontal Clamp•Hydraulic Feeding

•With Auto3000 Do Automatic Positioning, Automatic Feeding(Push), Automatic Cutting•Saw Blade

Model JIH-30 D Type
Cutting Angle 90º
Cutting Capacity (H x W) 240x240, 200x400, 150x530, 100x570, 50x580mm
Spindle Speed 1,185 RPM
Saw Blade Size 30"×50 mm bore
Table Area 810×730 mm
Table Height From Floor 887 mm
Motor 20 HP (Gear Belt + Inverter)
Air Pressure 4~6kgs/cm2
Conveyor length(opt.) 1-7 M
Machine Dimensions (L x W x H) 1,386 x 1,520 x 2,065 mm
Packing Dimensions (L x W x H) 1,500 x 1,620 x 2,100 mm
Net / Gross Weight 1,160 / 1,300 kgs
*We reserve the rights to modify above specification without notice.
Related Products