JIH-24 D Type - Sawing Machine Series

Product Description


  1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation.
  2. Concealed saw blade performs upward cutting. Single or multiple work pieces can be cut simultaneously.
  3. While cutting, the oil mist splashes automatically for cooling and lubrication.
  4. Cutting feed is driven by a hydraulic pneumatic cylinder for extremely stable cutting speed.
  5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
  6. The machine permits 90° cutting.
  7. Independent a hydraulic pneumatic cylinder for controlling workpiece clamping and cutting feed respectively.


  1. The clamping system is controlled by an independent air cylinder.
  2. The clamping system moves on linear guide way, that assures stable clamping.
Features :
  1. The clamping speed and cutting speed can be adjusted separately according to the material type, so as to achieve a more stable sawing effect (fast and stable sawing material), and the clamping system can clamp the material completely and tightly.
  2. The clamping pressure can be adjusted separately according to the material type to prevent material damage caused by over-pressure.


The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.

  1. Adjustable clamping height.
  2. Adjustable clamping speed.
  3. Adjustable cutting height.
  4. Adjustable cutting speed.
  5. push-pull type safety guard.
  6. Horizontal clamping for extremely stable clamping.
  7. .Accurately controlled oil mist system. greatly improves lubrication and cooling effect, while reducing trouble to a minimum.



  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those Atyped machine
  2. Chip Outlet Port
    The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.



Vacuum Oil Mist Unit

The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blad.


Schematic diagram

Product Specification

Standard Equipment

24'' Saw Blade x 1pce、Replace Saw Blade Tool、Toolbox

Optional Equipment

•CE Standard•Infeed, Outfeed Conveyor•Chip Collector•Horizontal Clamp•Hydraulic Feeding

•With Auto3000 Do Automatic Positioning, Automatic Feeding(Push), Automatic Cutting functions.

Model JIH-24 D Type
Cutting Angle 90 °
Cutting Capacity(HxW) 175 x 175, 150 x 340
80 x 400, 40 x 420 mm
Saw Speed 1,800R.P.M.
Saw Motor 10 HP
Saw Blade Size 24"x1"bore
Table Area(LxW) 664x560mm
Table Height From Floor 830mm
Conveyor Length (Opt.) 1-7 M
Air Pressure 4-6 kgs/cm²
Machine Dimensions
( LxWxH )
860 x 1,310x 1,850 mm
Packing Dimensions
( LxWxH )
980 x 1,430 x 2,050 mm
Net/Gross Weight 550 / 650 kgs
*We reserve the rights to modify above specification without notice.