JIH-18 P Type - Sawing Machine

Product Description


  1. Simply treadle the foot switch, and the machine will perform automatic workpiece clamping,automatic oil spray, and automatic cutting,safely and without effort.
  2. Concealed saw blade performs cutting from bottom to top.It allows for the cutting of a Single workpiece or multiple workpieces simultaneously.
  3. Automatic oil mist spray during cutting provides cooling and lubrication effect.
  4. Cutting feed is driven by a hydraulic-pneumatic cylinder for extremely stable cutting speed.
  5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
  6. The machine can conduct 90° cut-off.
  7. Workpieces clamping pressure is adjustable.


Specially deigned cutting motion

  1. After the saw blade moves upward for cutting, table moves to right and left for retracting 2mm, then the saw blade lower to it's home position. This special design may avoid return-cutting. while ensuring fine surface of cut and cutting accuracy.
  2. Two sets of hold down clamps on the worktable make the machine able to compact clamp the material, which is more suitable for cutting irregular stock. This design allows for independent adjustment of clamping speed and clamping pressure.


Schematic diagram




The operator may adjust clamping height and speed a cutting height and speed according to work piece size and thickness for saving wait time.

  1. Adjustable clamping speed.
  2. Adjustable cutting height.
  3. Adjustable cutting speed.
  4. The worktable extends 700mm and the size measurement fence is installed, suitable for short material sawing, especially for heat sink fin.
  5. Accurately controlled oil mist system. greatly improves lubrication and cooling effect, while reducing trouble to a minimum.

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blade.


  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those A typed machine.
  2. Chip Outlet Port
    The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.


The saw blade spindle is heat treated and plated for greatly increasing the spindle life

Product Specification

Applicable Materials

Aluminum, Brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment

18'' Saw Blade x 1pce、Replace Saw Blade Toolbox

Optional Equipment

•CE Standard•Infeed, Outfeed Conveyor•Chip Collector•Horizontal Clamp Hydraulic Feeding

•With Auto3000 for Automatic Positioning, Automatic Feeding(Pusher),Automatic Cutting functions.

Cutting Angle 90°
Cutting Capacity(HxW) 120 x 120, 100 x 180
20 x 260, 60 x 240 mm
Saw Speed 3,200 R.P.M.
Saw Motor 7.5 HP (10 HP opt.)
Saw Blade Sizes 18" x 1" bore
Table Area(LxW) 1,350 x 380 mm
Table Height From Floor 875 mm
Conveyor Length (Opt.) 1-7 M
Air Pressure 4 - 6 kgs/cm2
Machine Dimensions
( LxWxH )
1,500 x 840 x 1,460 mm
Packing Dimensions
( LxWxH )
1,620 x 960 x 1,660 mm
Net/Gross Weight 600 / 750 kgs
 *We reserve the rights to modify above specification without notice.