JIH-18 D Type - Sawing Machine

Product Description

Feature

  1. Simply step on the footswitch and the machine will safely and easily perform automatic clamping, automatic oil spraying and automatic cutting of the workpiece.
  2. The hidden saw blade cuts from bottom to top. You can cut a single workpiece or multiple workpieces simultaneously.
  3. Automatic oil mist spray during cutting provides cooling and lubrication effect.
  4. CThe cutting feed is driven by a hydro-pneumatic cylinder for a very stable cutting speed.
  5. The coating inside the machine is baked at a high temperature of 200 degrees (powder coating), and the coating does not peel off and is resistant to bumping.
  6. The machine can perform 90° cutoff or 45° cut using fixtures (optional).
  7. Workpiece clamping pressure can be adjusted.
  8. The independent hydro-pneumatic cylinder clamp makes the machine suitable for cutting solid materials and industrial aluminum extrusion.

 

  1. The clamping system is controlled by an independent air cylinder.
  2. The clamping system moves on linear guide way, that assures stable clamping.

 

Features:

  1. The clamping speed and cutting speed can be adjusted separately according to the material type, so as to achieve a more stable sawing effect (fast and stable sawing material), and the clamping system can clamp the material completely and tightly.
  2. The clamping pressure can be adjusted separately according to the material type to prevent material damage caused by over-pressure.

The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.

  1. Adjustable clamping height.
  2. Adjustable clamping speed.
  3. Adjustable cutting speed.
  4. Adjustable cutting height.
  5. Push-pull type safety guard.
  6. Accurately controlled oil mist system. greatly improves lubrication and cooling effect, while reducing trouble to a minimum.

  1. A.The use of control panel combined with operation sequence label and instruction labels increase operational convenience.
  2. B.Table: The specially designed table is precision ground and hard chrome plated to avoidscatching on the table surface. No rusting in 10 years of operation.
  3. C.The one-piece fabricated aluminum alloy fence permits 45° cutting If features light weight and can be easily mounted on the machine.

  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those A typed machine
  2. Chip Outlet Port
    The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

 

Vacuum Oil Mist Unit


The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blade.

 

 

The saw blade spindle is heat treated and plated for greatly increasing the spindle life.

 

 

 

45° degree cutting fixture (Optional)

 

 

 

Schematic diagram

 
Product Specification

Applicable Materials

Aluminum, Brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment

18'' Saw Blade x 1pce、Replace Saw Blade Tool、Toolbox

Optional Equipment

•CE Standard•Infeed, Outfeed Conveyor•Chip Collector•Horizontal Clamp•Hydraulic Feeding•45° Fixture

•With Auto3000 for Automatic Positioning, Automatic Feeding(Pusher),Automatic Cutting functions.

Model JIH-18 D Type
Cutting Angle 90 °
Cutting Capacity(HxW) 120 x 120, 100 x 230, 60 x 270, 20 x 300 mm
Saw Speed 3,200 R.P.M.
Saw Motor 7.5 HP (10HP opt.)
Saw Blade Size 18"x1"bore
Table Area(LxW) 640x380 mm
Table Height From Floor 860 mm
Conveyor Length (Opt.) 1-7 M
Air Pressure 4-6 kgs/cm²
Machine Dimensions
( LxWxH )
840 x 870 x 1,660 mm
Packing Dimensions
( LxWxH )
960 x 990 x 1,860 mm
Net/Gross Weight 360 / 440 kgs
 
*We reserve the rights to modify above specification without notice.
Video