JIH-18 A Type - Sawing Machine

Product Description

Feature

  1. Simply treadle the foot switch, and the machine will perform automatic workpiece clamping,automatic oil spray, and automatic cutting,safely and without effort.

  2. Concealed saw blade performs cutting from bottom to top.It allows for the cutting of a Single workpiece or multiple workpieces simultaneously.

  3. Automatic oil mist spray during cutting provides cooling and lubrication effect.

  4. Cutting feed is driven by a hydraulic-pneumatic cylinder for extremely stable cutting speed.

  5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.

  6. The machine can conduct 90° cut-off or 45° cutting with the use of a fixture (Optional)

The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving wait time.

  1. Adjustable clamping height.
  2. Adjustable cutting speed.
  3. Adjustable cutting speed.

 

  1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those A typed machine.
  2. Chip Outlet Port
    The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

  1. Vacuum Oil Mist Unit
    The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blade.

 

The saw blade spindle is heat treated and plated for greatly increasing the spindle life.

 

45° degree cutting fixture (Optional)

 

Schematic diagram

 
Product Specification

Applicable Materials

Aluminum, brass, heat sink, PVC, plastic steel, bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment

18'' Saw Bladex1 pce、Replace Saw Blade Tool、Toolbox

Optional Equipment

• CE Standard•Infeed, Outfeed Conveyor•Chip Collector•Horizontal Clamp• Hydraulic Feeding•45° Fixture

• With Auto3000 for Automatic Positioning, Automatic Feeding(Pusher),Automatic Cutting funchtions.

Model JIH-18 A Type
Cutting Angle 90 °
Cutting Capacity(HxW) 115 x 115, 100 x 220
60 x 270, 20 x 300 mm
Saw Speed 3,200 R.P.M.
Saw Motor 5HP(7.5HP,10HP opt.)
Saw Blade Size 18"x1"bore
Table Area(LxW) 640x380mm
Table Height From Floor 860mm
Conveyor Length (opt.) 1-7 M
Air Pressure 4-6 kgs/cm²
Machine Dimensions
( LxWxH )
840 x 800x 1,250 mm
Packing Dimensions
( LxWxH )
960 x 920 x 1,450 mm
Net/Gross Weight 300 / 380 kgs

 *We reserve the rights to modify above specification without notice.

Video