JIH-250 - Hydraulic Press

Products Description
  1. This machine is designed for punching hold and pressing.
  2. It has an easy operate hydraulic system that delivers powerful punching performance at very low noise levels.
  3. It has both manual and automatic operation capabilities. When the foot panel switch is press, the machine will perform punching hold (pressing) automatically.
  4. Suitable for two-layer mold machining (JIH-250B, JIH-250C).
  5. The upper base is organic whole shaping, which has strong tenacity, maximum impact resistance and long service life ( JIH-250B, JIH-250C ).

 

 Optional Safety Device

  1. Punching ( Pressing ) is controlled by foot panel switch with sensor of safety.
  2. Punching ( Pressing ) is controlled by double push-button switch.

 

Application Punching

Aluminum frame, aluminum extrusion, leather, brass, plastic, steel.

  1. Quicken punching head speed(high-speed punching head).
  2. The punch head can choose between equipped with a limit switch, equipped with a timer switch or equipped with pressure switch for controlling the stroke.

 

Timer Control(standard) Limit Switch For Controlling The Stroke Pressure Switch For Controlling The stroke End

Products Specification
Model JIH-250 A JIH-250 B JIH-250 C JIH-250 D
Punching Force 8 ton 10 ton 15 ton 20 ton
Motor 3 HP(5HP opt. for increasing production) 5HP  7.5HP 7.5HP
Stroke 150 mm 150 mm 150 mm 150 mm
Punching Height 240 mm 260 mm 260 mm 349 mm
Hydraulic Pressure 150 kgs / cm² 170 kgs / cm² 180 kgs / cm² 180 kgs / cm²
Table Area 240 x 500 mm 240 x 520 mm 340 x 550 mm 325 x 557 mm
Table Height From Floor 740 mm 840 mm 930 mm 979 mm
Machine Dim.
(L x W x H)
600 x 550
x 1,680 mm
700 x 550
x 1,825mm
800 x 650
x 2,150mm
1,253 x 973
x 2,153mm
Packing Dim.
(L x W x H)
720 x 670 x
1,860 mm
820 x 670
x 2,005mm
920 x 770
x 2,330mm
1,373 x 1,093
x 2,333mm
Net / Gross Weight 290 / 380 kgs 350 / 440kgs 550 / 650kgs 990 kgs / 1,100kgs

*We reserve the rights to modify above specification without notice.

 

Related Products