JIH-610A / 910A - Automatic Sawing Machine Series

Products Description





  1. Automation feed, positioning. oil spraying and sawing.
  2. Feed stroke 500mm (Reciprocating feed stroke up to any limit for length)
  3. Build-in sawblade performs upward cutting for increased safety.
  4. Ball screw is driven by servo motor for high accuracy. (Transmission through precision gear rack is available).
  5. Equipped with NC control. PLC features extremely stable control performance. 
  6. Feed is driven by hydraulic system, providing maximum stability of cutting.
  7. Two sets each of vertical clamps and one set side clamps provided on the feeding system permits cutting of irregular work piece.
  8. The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
  9. During operation, the machine provides detection for lack of material. Available to set remain length to be cut.
  10. Work pieces can be stacked.
  11. Feed methods : 1. Stepping feed. 2. Reciprocating feed. 3. Manual feed



Auxiliary support prevents work piece deflection.


Auxiliary support prevents work piece deflection.


Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for spraying. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blad.


Products Specification

Standard Equipment

24'' saw blade x1pcs ( or available for custom-made ) 、tool box

Optional Equipment

3 or 6 meters automatic feed device
Choice of precision ground rack or ball screw
Dust collector and suction hose
Infeed roller conveyor
Saw blade
Automatic air blast device

Pecially Design Cutting Motion :
After the saw blade moves upward for cutting, table moves to right and left for retracting 2 mm. Then the saw blade lowers to its home return-cutting. while ensuring fine surface of cut and cutting accuracy.

Transmission Device
Employs precision ground rack with accuracy up to 0.02mm ( suitable for 3 and 6 meter feed travel )


Optional:•CE Standard

Model JIH-610 A TYPE JIH-910 A TYPE(Original Model For JIH-36A)
Applicable Machine JIH-24D TYPE JIH-36D Type
Automatic Drive System Ball screw(Servo motor drive) Ball screw (Servo motor drive)
Cutting Capacity(H×W) 190 x 190 , 50 x 320, 40 x 420 mm
(Same as cutting capacity chart for JIH-610A TYPE)
300 x 300 , 200 x 460, 80 x 550 mm
(Same as cutting capacity chart for JIH-910A TYPE)
Max. Feed Distance (One Time) 500mm Unlimited recycle feed distance 500mm Unlimited recycle feed distance
Automatic Feed Accuracy ±0.15mm ±0.2mm
Cutting Length Display & Set UP By touch screen By touch screen
Saw Spindle Speed 1,800 R.P.M. 900 R.P.M.
Saw Spindle Motor 10 HP 20 HP
Hydraulic Feed Motor 1 HP 1 HP
Servomotor 1kw 1kw
Max. Load 100 kgs 100 kgs
Table Height From Floor 921 mm 1339 mm
Touch-Sensing Screen 7" 7"
Saw Blade Sizes 24" x 1"bore 36" x 50 mm bore
Air Pressure 4~6 kgs/cm² 4~6 kgs/cm²
Machine Dimensions(L×W×H) 2,500 x 1,300 x 2,020 mm 2,910 x 1,953 x 2,360 mm
Packing Dimensions(L×W×H) 2,620 x 1,420 x 2,220 mm 3,010 x 2,050 x 2,250 mm
Net / Gross Weight 1,600 / 2,000 kgs 3,480 kgs
*We reserve the rights to modify above specification without notice.
Related Products