JIH-610A / 910A - Automatic Sawing Machine Series

Product Description

 

 

 

Feature

  1. Automation feed, positioning. oil spraying and sawing.
  2. Feed stroke 500mm (Reciprocating feed stroke up to any limit for length)
  3. Build-in sawblade performs upward cutting for increased safety.
  4. Ball screw is driven by servo motor for high accuracy. 
  5. Equipped with NC control. PLC features extremely stable control performance. 
  6. Feed is driven by hydraulic system, providing maximum stability of cutting.
  7. Two sets each of vertical clamps and one side clamp provided on the feeding system permits cutting of irregular work piece.
  8. The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
  9. During operation, the machine provides detection for lack of material. Available to set remain length to be cut.
  10. Work pieces can be stacked.
  11. Feed methods : 1. Stepping feed. 2. Reciprocating feed. 3. Manual feed

 

 The clamps on the feed table are suited for cutting irregular material without addit~ional fixtures to fix the work piece.

 

Auxiliary support prevents work piece deflection.

 

Pecially Design Cutting Motion :
After the saw blade moves upward for cutting, table moves to right and left for retracting 2 mm. Then the saw blade lowers to its home return-cutting. while ensuring fine surface of cut and cutting accuracy.

 

 

Transmission Device
Employs precision ground rack with accuracy ( suitable for 2.5and 6 meter feed travel )

 

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for spraying. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blad.

 

Schematic diagram

Product Specification

Applicable Materials

Aluminum, brass, heat sink, PVC, plastic steel, bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment

24'' saw blade x1" bore (or 36” saw blade x 50mm bore) x 1pce、tool box

Optional Equipment

2.5or 6 meters automatic feed device
Choice of precision ground rack or ball screw
Chip collector and suction hose
Infeed roller conveyor
Saw blade
Automatic air blast device
CE Standard,as JIH-455A

Model JIH-610 A TYPE JIH-910 A TYPE
Main Machine JIH-24D TYPE JIH-36D Type
Automatic Drive System Servomotor driven Ballscrew Servomotor driven Ballscrew
Max. Feed Distance (One Time) 500mm (Reciprocating feed) 500mm (Reciprocating feed)
Cutting Capacity(H×W) 190 x 190 , 50 x 320, 40 x 420 mm
(Same as cutting capacity chart for JIH-610A TYPE)
300 x 300 , 200 x 460, 80 x 550 mm
(Same as cutting capacity chart for JIH-910A TYPE)
Cutting Length Display And Setting By touch screen By touch screen
Saw Speed 1,800 R.P.M. 900 R.P.M.
Saw Motor 10 HP 20 HP
Hydraulic Feed Motor 1 HP 1 HP
Servomotor 1kw 1kw (Opt. 1.5kw)
Saw Blade Sizes 24" x 1"bore 36" x 50 mm bore
Max. Load 100 kgs 100 kgs(Opt. 150kgs)
Table Height From Floor 921 mm 1,339mm
Touch-Sensing Screen 7" 7"
Air Pressure 4~6 kgs/cm² 4~6 kgs/cm²
Machine Dimensions(L×W×H) 2,500 x 1,300 x 2,020 mm 2,910 x 1,953 x 2,360 mm
Packing Dimensions(L×W×H) 2,620 x 1,420 x 2,220 mm 3,010 x 2,050 x 2,250 mm
Net / Gross Weight 1,600 / 2,000 kgs 2,950 / 3,450 kgs
 
*We reserve the rights to modify above specification without notice.