JIH-AUTO 250 R- Automatic Hydraulic Press

Product Description

Features

  1. This machine is designed for punching hold and pressing.
  2. It has an easy operate hydraulic system that delivers powerful punching performance at very low noise levels.
  3. It has both manual and automatic operation capabilities. When the start button is press, the machine will perform push materical and punching hold (pressing) automatically.
  4. Suitable for two-layer mold machining (model for choose JIH-250B/10tons, JIH-250C/15tons, JIH-250D/20Tons and JIH-250E/25Tons
  5. Automatic push system could choose different feeding length(2.5~6.5m)
Product Specification
ModelJIH-250 BJIH-250 CJIH-250 DJIH-250 E
Punching Force 10 ton 15 ton 20 ton 25 ton
Motor 5HP 7.5HP 7.5HP 10HP
Stroke 150 mm 150 mm 150 mm 150 mm
Punching Height 260 mm 260 mm 349 mm 349 mm
Hydraulic Pressure 170 kgs / cm² 180 kgs / cm² 180 kgs / cm² 180 kgs / cm²
Table Area 240 x 520 mm 340 x 550 mm 325 x 557 mm 325 x 790 mm
Table Height From Floor 840 mm 930 mm 979 mm 988 mm
Machine Dim.
(L x W x H)
700 x 550
x 1,825mm
800 x 650
x 2,150mm
1,253 x 973
x 2,153mm
1,190 x 1,127
x 2,173mm
Packing Dim.
(L x W x H)
820 x 670
x 2,005mm
920 x 770
x 2,330mm
1,373 x 1,093
x 2,333mm
1,370 x 1,247
x 2,353mm
Net / Gross Weight 350 / 440kgs 550 / 650kgs 990 kgs / 1,100kgs 1,190 kgs / 1,300kgs

*We reserve the rights to modify above specification without notice.

 

JIH-AUTO 3000ABCEF
Length
( L )
3,200mm 4,200mm 5,200mm 6,200mm 7,200mm
Feed
( L1 )
2,500mm 3,500mm 4,500mm 5,500mm 6,500mm
 
ModelJIH - AUTO 3000
Touch-Sensing Screen 7"
Servomotor 750W
MAX. Memory 100 sets
Positioning Speed 5-40 m/min
Max. Holding Force 50kgs
Max. Pushing Force 50kgs
 
Video