JIH-Auto 14A / JIH-Auto 14B

Products Description
Automatic feeding and automatic cutting

JIH - 14 A/B Type

Products Description
  • To operate the machine, simply treadle on the foot switch the machine will automatically perform clamping and cutting for convenient operation.
  • Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
  • Vertical and horizontal work piece clamping design ensures extremely firm clamping for any type of aluminum work piece.
  • Work piece clamping pressure is adjustable to eliminate aluminum deformation problem.
  • Automatic oil mist cooling for saw blades provides burr-free surface of cut while extending sawblade life.
  • Double saw blades construction provides fast cutting time saving and greatly upgrades efficiency .
  • Designed for cutting long and short work pieces.



Cutting method: rocking arm drive
Optional cutting: choice of individual right or left cutting(To avoid material kicking)






Automatic Positioning System


Horizontal Align
allows material to lean on the baffle plate and minimize forward movement which guarantees accurate cutting.

Cutting angle with 90°
Saw blade size:18" x1" hoer


Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and saw blade, high cutting accuracy and long service life of saw blad.
  Automatic Position System Specification:
Auxiliary support prevents work piece deflection.
  Standard Model
combined with a high speed cut off saw this effective device prepares the material.
  Graphical Interface System
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
  Touch Screen
the touch screen's function button allows practical understanding thus bringing out the best of this device

Automatic Positioning System
Automatic positioning system the fast moving pusher reaches a maximum distance of 60m/min with perfect positioning


Products Specification

Automatic Feed Length


Length ( L ) 3,200mm 4,200mm 5,200mm 6200mm 7,200mm
Feed ( L1 ) 2,500mm 3,500mm 4500mm 5,500mm 6,500mm


Products Specification

Cutting angle  45 degrees 45 degrees
Applicable Machine JIH-14A equipped with JIH - AUTO 3000 to convert it into an automatic feed machine. IH-14B equipped with JIH - AUTO 3000 to convert it into an automatic feed machine.
Cutting Capacity(H×W) 100 x 100mm 130 x 150mm
Spindle Motor 3HP X2 3HP X2
Saw blade Sizes 14" x 1' bore X2piece 18" x 1' bore X2piece
Table Height From Floor 800mm 800mm
Air Pressure 6 - 8kgs/cm² 6 - 8kgs/cm²


Automatic Position System Specification
Touch-Sensing Screen 7"
Servomotor 400w
Max. memory 100 sets
Positioning Speed 20-50 m/min
Positioning Accuracy ±0.15mm
Max. Holding Force 50kgs
Max. Pushing Force 50kgs
Max. Feed Length opt. length 3~7 m
(Normal length 2.3~6.3m)
*We reserve the rights to modify above specification without notice.
Related Products