JIH-CNC800 SD 5 Type 5-Axes CNC Machining Center

Products Description

PC-Base CNC Controller

  1. Machine are equipped with Syntec PC-Base CNC controller, featuring easy to learn and easy to operate.
  2. Mitsubishi, Fanuc or Siemens controller is optional.

 

Pneumatic Counter Balance On Z-Axis

  1. The Z-axis movement is counter-balanced by using an air cylinder, allowing the Z-axis to move more smoothly.
  2. The counter balance system is equipped with and accumulator to supply stable air flow at all times.
  3. 3 For H Type

 

Planetary Gear Reducer

  1. Syntec controller
  2. 24 ATC unit
  3. Oil mist cooling system
  4. Spindle air blast
  5. Automatic lubrication system for linear
  6. Leveling kit and tool box
  7. Telescopic cover for guide ways
  8. Wire switch for emergency stop
  9. Alarm lamp

 

Standard Equipment
Advanced CNC Controller
SINTEC controller Mitsubishi controller Fanuc controller

PC-Base CNC Controller

  • Machines are equipped with Syntec PC-Base CNC controller, featuring easy to leam and easy to operate.
  • Mitsubishi, Fanuc or Siemens controller is optional.

Pneumatic Counter Balance On Z-Axis

  • The Z-axis movement is counter-balanced by using an air cylinder, allowing the Z-axis to move more smoothly.
  • The counter balance system is equipped with and accumulator to supply stable air flow at all times.

Planetary Gear Reducer

  • Syntec controller
  • 24 ATC unit
  • Oil mist cooling system
  • Spindle air blast
  • Automatic lubrication system for linear guide ways
  • Leveling kit and tool box
  • Telescopic cover for guide ways
  • Wire switch for emergency stop
  • Pilot lamp

Spindle Cooler

Heat Exchanger for Electrical Cabinet

Chain Type Chip Conveyor

Sophisticated Laser Inspection

After each machine has been assembled, our experienced personnel applies a sophisticated laser instrument to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.

Ball Bar Test

To assure the highest structural mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slideways.

 

Optional Equipment

Imported High Precision Gear Reducer Ball Screw Support Rack Transmission On X-Axis (European Gear Reducer)

The X-axis movement is driven by a servo motor and transmitted through high precision ball screw with gear reducer. This special design not only produces powerful driving force, but also provides high positioning accuracy on the X-axis.

The X-axis is transmitted through a ø80 mm extra-large ball screw, which is supported by two blocks to improve self-deflection of the screw. This help upgrade positioning accuracy on the X-axis.

The precision machined rack and pinion transmission mechanism features backlash-free performance and minimum pitch error. This leads to high positioning accuracy on the X-axis.

Multi-Machining for Short Work pieces

For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.

The X-axis rack and its driving gears are free from backlash problem, featuring minimum pitch error, accurate x-axis positioning and rapid traverse.

 

Screw type chip conveyor

  • Coolant through tool holder
  • Optical scale
  • Automatic work piece measurement
  • Coolant through spindle
  • Siemens controller
  • 4th axis (index of table or spindle tilting)
  • 5th axis table rotary & tilting or spindle rotary & tilting

Extra Long Work piece Machining

This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. Wit such machining nodes, you can save considerable time.

Various Areas of Machining

With this mode of machining, greater Various Areas of Machining efficiency can be obtained.

 

Products Specification
Model JIH-CNC800 SD5
Travel 
X-Axis Stroke 800 mm
Y-Axis Stroke 600 mm
Z-Axis Stroke 550 mm
B-Axis Rotary Range -50°~+110°
C-Axis Rotary Range 360°
Spindle Center To Table Surface 110~630 mm
Spindle 
Spindle Drive Type Bulid-in
Spindle Speed 12,000 R.P.M.
A.T.C
Tool Storing Capacity 24(opt.32pcs)
Tool shank BT40
Max. Tool Length 250 mm
Max. Tool Diameter ∅76(∅127)
Motor 
Spindle Motor 10/12.5 KW
X / Y/ Z Axis Motor 5 / 3.5 / 5 KW
B.C Axis Motor 9.6 / 5.0 KW
B.C Axis Table
Working Table Size Ø650 / Ø500 mm
Center Hole Size Ø50 H7×30 mm
T-Slots(No. x W x P) 5 X 100 X 18 mm
Max. Working Size Ø520×330L mm
Max. Loading Capacity 300 kgs
Feed Rate
X / Y / Z Rapid Feed Rate 36 / 36 / 36 m/min
B / C Rapid Feed Rate 25 mm/min
Cutting-Feed Rate 1 - 10,000 R.P.M.
General  
Machine Weight 8,800 kgs
Water Tank 240 L
Packing Dimensions(LxWxH) 3,430X 3,810 X 3,780 mm
Air Required 4~6 kgs

 *We reserve the rights to modify above specification without notice.

Related Products