JIH-CNC S Type (3 Axes And 4 Axes) CNC Machining Center

Products Description

Machine Features

    • Choice of X-axis travels: 3,500/4,500/5,500/6,500mm.
    • Table type: vise
    • ISO 30 spindle speed: 18,000 RPM
    • 8-tools disk type magazine.(Opt. 12 tools)
    • Travelling column design features increased machining efficiency and accuracy.
    • Three axes are equipped with high precision linear guide ways.
    • 3-axes ball screws are directly coupled with servo motors.
    • Syntec controllers-PC-based.
    • Fully enclosed splash guard (optional).

JIH-CNC6500 S Type (3 AXIS AND 4 AXIS) CNC Machining Center



  • The angular head can be swiveled to 95° rightward and leftward, making it suitable for angular drilling and tapping operations. Also, suitable for face milling and multi-surface machining in one setup.
  • Swiveling degree is adjusted through computer control. Minimum indexing angle is:5°.
  • A tool clamp/release button is provided on the angular head.
  • Built-in type spindle features high accuracy, low vibration, low noise and no backlash.


Model 6500S 3500S
LxWxH 9,800x2,500x2,300mm 6,800x2,500x2,300mm
Table 6,500x400mm 3,500x400mm


Tool magazine

Spindle tilting ±0~90°(opt.)

Vise moving automatically(opt.)


Applicable Materials

  • Aluminum
  • Other non-ferrous metals


Applicable Industries

  • Aluminum door and windows
  • Canopies Wall(glass wall)
  • Extruded aluminum machining              
  • Long metallic parts


H.S.D Spindle


Standard Equipment

Advanced CNC Controller
SINTEC controller

PC-Base CNC Controller

  • Machines are equipped with Syntec PC-Base CNC controller, featuring easy to learn and easy to operate.

  • Syntec controller
  • ATC unit
  • Oil mist cooling system
  • Spindle air blast
  • Automatic lubrication system for linear guide ways
  • Leveling kit and tool box
  • Telescopic cover for guide ways
  • Wire switch for emergency stop
  • Pilot lamp
  • Heat exchanger for electrical cabinet

Sophisticated Laser Inspection

After each machine has been assembled, our experienced personnel applies a sophisticated laser instrument to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.

Ball Bar Test

To assure the highest structral mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slideways.


Standard loading capacity is 8 tools.

Standard vise

ES915 HSD spindle--high precision and high speed. ( optional5.5K or 18000RPM)

PC-Based CNC Control
The machine is equipped with a PC-based CNC control as standard equipment. It is easy to learn and operate.

Automatic Lubricator
All linear guide ways and ball screws are automatically lubricated by a erasures lubricator. It keeps all axes move smoothly.

Oil Mist Cooling
The machine is equipped with an oil mist cooling system for efficient cooling of cutting tool and work piece. It not only extends the service life of the tool, but also ensures superior cutting quality.

Standard vise

Stopper(air fence)

Multi-Machining for Short Work pieces

For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.

Extra Long Work piece Machining

This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. Wit such machining nodes, you can save considerable time.

Various Areas of Machining

With this mode of machining, greater efficiecy can be obtained.


Optional Equipment


Tool and tool holder

4th Axis (the spindle head
could be rotary + - 95 degree)

CE Mark
Chain Type Chip Conveyor

Optional Features

  • Coolant through tol holder
  • Automatic work piece measurement
  • 4th axis (index of table or spindle tilting)
  • 5th axis table rotary & tilting )


Products Specification
ModelJIH-CNC 6500S (3Axes)JIH-CNC 6500S (4Axes)
X-Axis Stroke 3,500/4,500/5,500/6,500mm (Opt.) 3,500/4,000/5,000/6,500mm(Opt.)
Y-Axis Stroke 400 mm

200 mm

Z-Axis Stroke 500 mm 500 mm
Table Type vise (1 set/per meter) vise (1 set / per meter)
Table Size 400 x 3,500-6,500mm 400 x 3,500-6,500mm
Table Heigh From Floor 950 mm 950 mm

Spindle Speed

18,000R.P.M. (Opt. 24,000R.P.M.) 18,000R.P.M. (Opt. 24,000R.P.M.)
Spindle Motor 7.5kw 7.5kw
Spindle Taper Cone ISO 30 ISO 30
Feed Rate
Rapid Feed Rate(X/Y/Z) X:50 m/min, (Opt. 80 m/min) Y:24 m/min, Z:24m/min X:50 m/min, (Opt. 70m/min) Y:24 m/min, Z:24 m/min
Servo motors of 3 axes X:2kw , Y:1kw , Z:2kw X:2kw , Y:1kw , Z:2kw, A:750w
Cutting feed rate F:1-5,000 mm/min F:1-5,000 mm/min
Magazine Capacity

8 Tools(Opt. 12 tools)

8 Tools(Opt. 12 tools)

Tool Holder ISO 30 ISO 30
Machine Weight 4,500-6,500 kgs 4,500-6,500 kgs
Machine Dimensions 6,800-9,800 x 2,500 x 2,300 mm 6,800-9,800 x 2,500 x 2,300 mm
Packing Dimensions 7,000-10,000 x 2,350 x 2,450 mm 7,000-10,000 x 2,350 x 2,450 mm
Required Pneumatic Pressure 6 kgs/cm2 6 kgs/cm2

*We reserve the rights to modify above specification without notice.

Related Products