JIH-E Type 3 Axes CNC Machining Center

Products Description
Machine Features
  • Choice of X-axis travels: 3,500/4,500/5,500/6,500mm.
  • Table type: vise
  • ISO 30 spindle
     Spindle speed: 18,000 RPM (standard),
                              24,000 RPM (optional).
  • 8-tools disk type magazine.
  • Travelling column design features increased machining efficiency and accuracy.
  • Three axes are equipped with high precision linear guide ways.
  • X-axis ball screw is directly coupled with servo motor.
  • Syntec controllers-PC-based, Mitsubishi, Fanuc and Siemens)


Automatic Tool Changer

  • Armless type automatic tool change.
  • 8-tools disk type magazine.
  • Accommodates ISO 30 tools.
  • Tool selection method is bi-directional and random providing fast tool change and smooth motions.





Model 6500E 3500E
LxWxH 8,500x1,500x2,250mm 5,500x1,500x2,250mm
Table 6,500x300mm 3,500x300mm


Applicable Materials

  • Aluminum
  • Plastic
  • Other non-ferrous metals


Applicable Industries

  • Aluminum door and windows
  • Curtain Wall (glass wall)
  • Extruded aluminum





Standard Equipment

Advanced CNC Controller
SINTEC Controller Mitsubishi Controller Fanuc Controller

PC-Base CNC Controller

  • Machines are equipped with Syntec PC-Base CNC controller, featuring easy to learn and easy to operate.
  • Mitsubishi, Fanuc or Siemens controller is optional.

Planetary Gear Reducer

  • Syntec controller
  • ATC unit
  • Oil mist cooling system
  • Spindle air blast
  • Automatic lubrication system for linear guideways
  • Leveling kit and tool box
  • Telescopic cover for guideways
  • Wire switch for emergency stop
  • Pilot lamp
  • Heat exchanger for electrical cabinet

Sophisticated Laser Inspection

After each machine has been assembled, our experienced personnel applies a sophisticated laser instrument to inspect and calibrate ball screw pitch error and backlash, positioning accuracy, as well as repeatability on the X, Y and Z-axes. Through the laser inspection process, we can guarantee high feed accuracy on three axes as well as overall machining accuracy.

Ball Bar Test

To assure the highest structural mechanical assembly accuracy, and to eliminate the reverse spike phenomenon, all Bar tested during the assembly processes. The test will calibrate the machine to the optimum status, thus extend the life time of axial ball screw and slide ways.

Multi-Machining for Short Work pieces

For machining short work pieces, the operator may mount the work pieces on the table to machine simultaneously.

Extra Long Work piece Machining

This machine is excellent for machining extra-long work pieces with only one setup. Suitable machining includes milling, drilling and tapping. With such machining nodes, you can save considerable time.

Various Areas of Machining

With this mode of machining, greater efficiency can be obtained.


Optional Equipment

Chain Type Chip Conveyor


  • Coolant through tool holder
  • Automatic work piece measurement
  • 4th axis(index of table or spindle tilting)
Products Specification
X-Axis Stroke 3,500/4,500/5,500/6,500 mm(Opt.)
Y-Axis Stroke 300 mm
Z-Axis Stroke 200 mm
Distance from spindle nose to table surface Min. 150 mm, Max. 350 mm
Table Type vise(Opt.)
Table Size 300 x (3,500~6,500) mm
T-Slot(NO. x Pitch x Size) 850 mm
Spindle Speed 18,000 R.P.M.(Opt. 24,000 R.P.M.)
Spindle Motor 7.5 kw (Opt.9 kw)
Spindle Taper Cone ISO 30
Feed Rate 
Rapid feed rate (X/Y/Z) X:60 m/min, Y:24 m/min, Z:24 m/min
Servo Motors 3 Axes  X: 1.3kw, Y: 1.3kw, Z: 1.3kw
Repeat positioning accuracy X±0.03, Y±0.02, Z±0.02
Cutting Feed Rate F:1~5000 mm/min
Magazine Capacity 8 Tools
Tood Holder ISO 30
Max. Tool Diameter 50mm
Machine Weight 3,500~5,500 kgs
Machine Dimensions 5,400~8,900 x 1,600 x 2,300 mm
Packing Dimensions 5,600~9,100 x 1,700 x 2,300 mm
Required Pneumatic Pressure 6 kgs/cm2
*We reserve the rights to modify above specification without notice.
Related Products