JIH - CNC 6500 M TYPE CNC Machining Center
JIH - CNC 6500 M TYPE SAFETY GUARD (FRONT SIDE AND BACKSIDE)
JIH - CNC 6500 M TYPE SAFETY GUARD(FRONT SIDE)
MACHINE FEATURES
- Choice of working lengths: 3.5,4.5,5.5 and 6.5 meters.
- It is avaiable for each aluminum meterial of short - scale multipe processing & long - scale processing.
- Traveling column features high positioning accuracy.
- The column longitudinal traverse is driven through servomotor combined with gear/rack transmission.
- Three axes travels and driven by servomotors.
- High precision linear guide ways on three axes assure fast and smooth movements.
- 12-tool magazine is standards equipment.
- Air clamps for workpieces.(vise are option)
- Emergency hold wire is provided at the front of machine for safety protection for the operator and the machine.
- Movable chips are equipped at the bottom of the machine. providing convenient chip handling.
STANDARD ACCESSORIES
- Syntec CNC controller
- Oil mist cooling
- Safety guard for cutter(BT40)(BT30 without this device)
- Auto lube system
- Spindle air blast
- Tool kit
- Telescopic covers for X.Y.Z.axis
- Emergency hold wire
- Alarm light
TURRET TYPE MAGAZIIE
1. the turret type magazine employs armless tool change. Bi-directional,random tool selection increases tool change speed.
2.The turret accommodates of cutting tool Standard loading capacity is 12 tools.
1. the turret type magazine employs armless tool change. Bi-directional,random tool selection increases tool change speed.
2.The turret accommodates of cutting tool Standard loading capacity is 12 tools.
M.P.G HAND WHEEL
The control box is equipped with an M.P.G. hand wheel,providing added convenience for tool setting and running testing.
The control box is equipped with an M.P.G. hand wheel,providing added convenience for tool setting and running testing.
PC-BASED CNC CONTROL
1.The machine is equipped with a PC-based CNC control as standard equipment. It is easy to learn and operate.
2.Upon request , Mitsubish or Fanuc CNC control is available(optional).
1.The machine is equipped with a PC-based CNC control as standard equipment. It is easy to learn and operate.
2.Upon request , Mitsubish or Fanuc CNC control is available(optional).
AUTOMATIC LUBRICATOR
All linear guide ways and ball screws are automatically lubricated by a easures lubricator. It keeps all axes move smoothly.
All linear guide ways and ball screws are automatically lubricated by a easures lubricator. It keeps all axes move smoothly.
OIL MIST COOLING
The machine is equipped with an oil mist cooling system for efficient cooling of cutting tool and work piece. It not only extends the service life of the tool, but also ensures superior cutting quality.
The machine is equipped with an oil mist cooling system for efficient cooling of cutting tool and work piece. It not only extends the service life of the tool, but also ensures superior cutting quality.
TRAVELING COLUMN
1.The column is ruggedly constructed with maximun rigidity assuring deformation-free performance at all times. The column moves on high precision linear guide ways.
2.Extra-wide span between linear guide ways provide solid support for the column.
3.High precision ball screws are driven by a servomotor, ensuring fast movement and high positioning accuracy for the column.
1.The column is ruggedly constructed with maximun rigidity assuring deformation-free performance at all times. The column moves on high precision linear guide ways.
2.Extra-wide span between linear guide ways provide solid support for the column.
3.High precision ball screws are driven by a servomotor, ensuring fast movement and high positioning accuracy for the column.
OPTIONAL EQUIPMENT
 Heat exchanger on cabinet |
 CNC controllers-MITSUBISHI(M70) |
 CNC controllers-FANUE(OIMC) |
 Lift-up swarf conveyor |
 CE mark |
 Opt vise 1 |
 Auger type swarf conveyor |
 Safety guard |
 Opt vise 2 |
 Air fence(stopper) |
 4th axis |
 Opt vise 3(for BT30) |
 Tools / Tool Holder |
 E86N/T25 Spindle probing system with radio transmission : Automatic sence the material size when processing. |
FLAT WOTKING TABLE WITH T -SLOTS |
Controller( siemens) |
Angle Head (90 degrees or 0-120 degrees) |
| SPECIFICATIONS | ||
|---|---|---|
| MODEL | JIH-CNC 6500(BT40) | JIH-CNC 6500(BT30) |
| TRAVEL | ||
| X-axis travel | 6,500mm (opt.3,500mm、4,500mm、5,500mm) |
6,500mm (opt.3,500mm、4,500mm、5,500mm) |
| Y-axis travel | 350mm | 300mm |
| Z-axis travel | 350mm | 300mm |
| Spindle center to table surface | Mini 150mm、Max 500mm | 150~450mm |
| TABLE | ||
| Table working type | 3 sets T-slots | Vise (1 set/per meter) |
| Table working surface | 470x6,500mm | 350x6,500mm |
| Max. loading capacity | 500 kgs | 300 kgs |
| T-Slots (No.xWxP) |
3x50x190 mm | - |
| SPINDLE | ||
| Spindle speed | 8,000R.P.M. | 10,000R.P.M. |
| Spindle motor | 7.5kw(10HP) | 3.75kw(5HP),opt.5.5kw |
| Spindle taper | BT40 | BT30 |
| FEEDRATE | ||
| Rapid traverse(X/Y/Z) | X:40 m/min、Y:24 m/min、Z:24 m/min | X:50 m/min、Y:24 m/min、Z:24m/min |
| 3-Axes servomotors | X-Axis:2kw、Y-Axis:1.0kw、 Z-Axis:1.0kw(Mitsubishi) |
X-Axis:2kw、Y-Axis:1.0kw、 Z-Axis:1.0kw(Mitsubishi) |
| Positioning accuracy | X-axis: ±0.1mm, Y-axis: ±0.02mm, Z-axis: ±0.02mm | X-axis: ±0.1mm, Y-axis: ±0.02mm, Z-axis: ±0.02mm |
| Cutting-feed rate | F:1~5,000mm/min | F:1~5,000mm/min |
| A.T.C | ||
| Tool storing capacity | 12 tools | 12 tools |
| A.T.C | Turret Type | Turret Type |
| Tool shank | BT40 | BT30 |
| Pull stud | 45° | 45° |
| Max.tool length | 300mm | 200mm |
| Max.tool diameter | 120mm | 100mm |
| Max.tool weight | 3 kgs | 2.5 kgs |
| GENERAL | ||
| Machine weight | 9,000~11,000kg | 7,000~9,000kg |
| Machine Dim. LxWxH) | 5,300-8,300 x 1,900 x 2,800mm | 5,300-8,300 x 1,900 x 2,600mm |
| Packing Dim. (LxWxH) | 5,500~8,500 x 2,100 x 2,400mm | 5,500~8,500 x 2,100 x 2,300mm |
| Air required | 6 kgs/cm² | 6 kgs/cm² |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
