JIH AUTO 20
FEATURE
- When push the "saw start" button the machine performs feed material, rotaty angle , clamping material and cutting automatically. The sawblade moves upward for cutting. Meanwhile Do not keep the hand under the safe ground .
- The pressure is adjustable to prevent distortion materials by over force.
- The clamping and saw feeding height are adjustable which according to the profile to adjustment. This way is for shorten the waiting time.
- The worktable can be rotary for adjusted the cutting angle.
- Miter cut up from + - 45 degrees to 0 degree or (from 90 degrees to 45 degrees)
- Auto oil mist system can lubricate and coolant the sawblade to prolong the sawblade life.
- TWO SERVO MOTORS CONTROL FOR PUCHER SYSTEM AND ROTARY TABLE
- NC CONTROLLER PROVIDES USER-FRIENDLY OPERATIONS
- EMPLOYS HUMAN/ MACHINE INTERFACE TOUCH SENSING SCREEN FOR MAXIMUM OPERATION CONVENIENCE. THE CONTROLLER FEATURES SELF-DIAGNOSTIC FUNCTION THAT IS DISPLAYED ON THE SCREEN FOR CONVENIENT TROUBLESHOOTING.
- 100 SUITES MEMORY COMMONLY USED MODULE. (PER SUITE CAN BE SETUP FOR 12 DIFFERENT KINDS OF CUTTING SIZE.)
- THE PROGRAM CAN RECORD THE CUTTING TIME AND CUTTING QUANTITY AUTOMATICALLY. THIS INFORMATION WILL BE DISPLAYED FOR EVERY CUTTING & A WORKING REPORT OFFERED. THIS DESIGN ALLOWS THE PROCESS COST TO BE CALCULATED MORE CONVENIENTLY.
| Applicable machine | JIH-20 equipped with JIH-AUTO 3000 |
|---|---|
| Automatic cutting angle | + 45° ~ 0 ° ~ - 45 ° |
| Sawblade sizes | 20" x 1" bore |
| Spindle speed | 3000 R.P.M. |
| Motor | 5 HP (opt. 7.5 HP) |
| Air pressure | 4 - 6 kg/cm² |
| Table area | 920 x 650 mm |
| Table height form floor | 875 mm |
| Rotary table drive servomotor | 400 w |
| Feed drive servomotor | 400 w |
| Automatic feed length | 7 m( normal 6.5 m ), 3~6 m opt. |
| Positioning accuracy | ± 0.15mm |
| Max. pushing force | 50 kgs |
| Max. holding force | 50 kgs |
| Positioning speed | 20 - 50 m/min |
| Frequently use memory | 100 sets |
| Touch-sensing screen | 5.7" |
| N / G weight | 1100 kgs / 1400 kgs |
| Machine dim. ( LxWxH ) | 8400 x 1100 x 1850 mm |
| Sliding table
dim. ( LxWxH ) |
8520 x 1220 x 2050 mm |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
