• HOME > PRODUCTS

Panel saws

JIH-8CS NC Automatic Panel Saw

FEATURE
  1. Advanced computer control for maximum operation convenience.
  2. Choice of cutting capacity- 8", 10" and 12"
  3. Suspended gripper.
  4. Variable saw carriage feed speed.
  5. Online with personals computer.
  6. Self diagnostic function.
  7. Conveniently parameter setting by signal guides.
  8. Panel feed driven by AC servo motor

 
 
PANEL FEEDING MECHANISM :
The panels are fed on the rubber wheels without scratching on the panel surface. Also, fast and smooth feeding performance are ensured.		   SCORING SAWBLADE USTMENT :
The scoring sawblade can be adjusted vertically for depth of cut control. Once wear occured, adjust its position for compensation. The scoring sawblade also can be adjusted laterally for alignment to main sawblade.
 
FEED DRIVE SERVO MOTOR :
The feed system is driven by high performance AC servo motor featuring great torque output and superior positioning accuracy. Swiss imported gear reducer with backlash adjustable assures minimum backlash and precision transmission. The Swiss imported rack combined with V slideways provides maximum dependability of travel accuracy.		   DOUBLE BEAM CLAMPING :
The pressure beams come down to hold the panel separately. This ensures firm clamping on panel especially when performing the final cut.
 
FLOATING TABLE :
The floating tables are drilled with holes throughtout the table area, in which are fitted steel balls. Powerful blowers supply air into the holes, forcing the steel balls to protrude above the table surface, creating a floating effect. This allows the panels to infeed effortlessly. The table surfaces are covered with bakelite to prevent scratching of the panel during feeding.		   VARIABLE SAW CARRIAGE FEED SPEED :
The saw carriage feed speed is controlled by a fequency in venter, providing variable feed speed. Speed range is from 9 to 37 m/min.

ADVANCED SAW CARRIAGE :
The saw carriage feed is driven by rugged wire. Fitted with a shock absorbing cylinder to prevent bumping while it travels to the left side. he scoring blade may be laterally adjusted for a burr free cut or vertically adjusted for proper depth of cut and to compensate for blade wear.
 
PIANO-KEY TYPE DUST GUARD :
This sectional Piano-key type dust guard not only acts as a surrounding sawblade guard, but also fully prevents sawdust from spraying out of thee machine.
SUSPENDED GRIPPER :
The grippers are air operated, and are fitted with rubber to avoid damage on workpiece
PANEL FENCE PRESS :
When cutting a narrow panel, panel fence presses can be applied for pressing the panel against the fence, ensuring high square accuracy of cut. The fence press motions are controlled through computer for maximum convenience.		    

MODEL(W) 8 FEED 10 FEED 12 FEED
CAPACITY Maximum
length of cut (L)		 2600mm 3200mm 3800mm
Maximum
depth of cut (H)		 80MM(opt.100mm) 80mm (opt.100mm) 80mm(opt.100mm)
MAIN
SAWBLADE		 Blade diameter  Ù355(opt. 405mm)  Ù 355mm (opt. 405mm)  Ù 355mm (opt. 405mm)
Arbor diamete  Ù 1"  Ù 1"  Ù 1"
Speed 1500~3500R.P.M
(by inverter).		 1500~3500R.P.M
(by inverter).		 1500~3500R.P.M
(by inverter).
SCORING
SAWBLADE		 Blade diameter  Ù 180mm  Ù 180mm  Ù 180mm
Arbor diamete  Ù 1"  Ù 1"  Ù 1"
Speed 1500~3500R.P.M
(by inverter).		 1500~3500R.P.M
(by inverter).		 1500~3500R.P.M
(by inverter).
SAW
CARRIAGE		 Feed forward speed 1~7M/min or (Opt.9~37M/min) 1~7M/min or (Opt.9~37M/min) 1~7M/min or (Opt.9~37M/min)
Retract speed 67 M/min 67 M/min 67 M/min
Motor Main sawblade motor 13HP (and the inverter motor 15HP) or (Opt.18HP and the inverter motor 20HP) 13HP (and the inverter motor 15HP) or (Opt.18HP and the inverter motor 20HP) 13HP (and the inverter motor 15HP) or (Opt.18HP and the inverter motor 20HP)
Saw carriage drive motor 2HP 2HP 2HP
High pressure blower motor 3HP
(and the inverter motor 3HP)		 3HP
(and the inverter motor 3HP)		 3HP
(and the inverter motor 3HP)
Automatic feed system 1kw (AC Servo) or (Opt.2KW) 1kw (AC Servo) or Opt.2KW) 1kw (AC Servo) or Opt.2KW)
Automatic panel feed speed 30 M/min 30 M/min 30 M/min
Working air pressure 5-6kg/cm 2 5-6kg/cm 2 5-6kg/cm 2
Table height from floor 820mm(or 900MM) 820mm(or 900MM) 820mm(or 900MM)
N.W. 2800kg 3000kg 3300kg
Machine diamesions 5360 x 5585 x 1625 mm 5890 x 6200 x 1525 mm 6500 x 6800 x 1525mm

 

 


*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.