| FEATURE |
| ACCURATE RIPPING
OPERATION : |
- The saw carriage runs with bronze wheel, which is
cnc lathe precision machined for accurate concentricity
producting fine smooth surface cut. the guide rods,
hard chrome plated, provide rigid support for saw carriage.
the ripping accuracy is guaranteed.
- PRESSURE BEAM :
- The uniform holding pressure through the entire pressure
beam is achieved through a linkage mechanism, ensuring
synchronized cylinder actuation at both side.
- FENCE : Made of extruded aluminum alloy, and surface
precision ground. Thefence is fitted with a filp over
stop for convenient repetitive cutting. Ascale is furnished
for reading of width of cut.
- COMPREHENSIVE SAFETY GUARD :
- Once the emergency stop button is pressed, or safety
bar is actuated by operator's hand in an unsafe place,
the saw operation immediately stop. Blade lowers under
table, and pressure beam raise up to release the panel.
- WARNING LAMP :
- Awarning lamp is furnished that giving operator a
visible alert in event overload cutting occurs.
|
| |
| EFFICIENT
DUST COLLECTION : |
| Dust chute is covered
with a splite rubber to form a totally enclosed dust collection
system, and fully prevent the hose broken result form it's
fatigue. |
 |
1. ADVANCED SAW CARRIAGE
The saw carriage feed is driven by rugged wire. Fitted
with a shock absorbing cylinder to prevent bumping while
it travels to the left side. The scoring blade may be
laterally adjusted for a burr free cut or vertically
adjusted for proper depth of cut and to compensate for
blade wear.
|
 |
2. PRECISE SAW STROKE CONTROL BY OPTICAL FIBER SENSOR
The machine employs an advanced, high performce, optical
fiber sensor. It's highly sensitive performance ensures
extremely accurate saw stroke control.
|
 |
3. SAW CARRIAGE DRIVE MOTOR
The saw carriage is driven by a 3HP AC motor. The saw
carriage with 4 feed speeds are changed by pulley. Saw
carriage feed forward speeds are 12, 16, 21 and 26 meters
per minute, and retract speeds are 24, 32, 42 and 52
meters per minute.
|
 |
4. SCORING SAWBLADE ADJUSTMENT
The scoring sawblade can be adjusted vertically for
depth of cut control. Once wear occured, adjust it's
position for compensation. The scoring sawblade also
can adjusted laterally for alignment to main sawblade.
|
 |
5. PANEL POSITIONING BY CYLINDER ( OPTIONAL )
Two air cylinders mounted at outfeed side marking it
easy for handling the panel after cut
|
 |
6. PIANO-KEY TYPE DUST GUARD ( OPTIONAL )
This sectional dust guard not only acts surrounding
sawblade guard, but also fully prevents sawdust form
spraying out of the machine.
|
 |
7. FLOATING TABLE ( OPTIONAL )
The floating tables are drilled with holes throughout
the table ares, in which are fitted steel balls. Powerful
blowers supply air into the holes, forcing the steel
balls to protrude above the table surface, creating
a floating effect. This allows the panels to infeed
effortlessiy. The table sureface are covered with bakelite
to prevent scratching of the panel during feeding.
|
