JIH-455 A Type Sawing machine (NC Fully Automatic High prodution Sawing machine)
FEATURE
- Automation feed, positioning. oil spraying and sawing.
- Feed stroke 500mm (Reciprocating feed stroke up to any limit for length)
- Concealed type sawblade performs upward cutting lor increased safety.
- Ball screw is driven by servo motor for high accuracy. (Transmission through precision ground rack is available).
- Equipped with NC control. PLC features extremely stable control performance. Employs CE certified control components.
- Feed is driven by hydraulic system, providing maximum stability of cutting
- Two sets each of held-down clamps and one set side clamps provided on the feeding system permits cutting of irregular work piece.
- 100 sets of size memory capacity. Each set allows for setting 12 sizes.
- The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
- During operation, the machine provides detection for lock of material. Available to set tail length to be cut.
- Workpieces can be stacked.
- Maximum feed speed is of up to 60 m/min.
- Maximum cutting rate is 4 seconds for one cutting.
- Feed methods : 1. Stepping feed. 2. Reciprocating feed. 3. Manual feed
SPECIALLY DESIGN CUTTING MOTION :
After the sawblade moves upward for cutting, table moves to right and left for retracting 2 mm. Then the sawblade lowers to its home return-cutting. while ensuring fine surface of cut and cutting accuracy.
After the sawblade moves upward for cutting, table moves to right and left for retracting 2 mm. Then the sawblade lowers to its home return-cutting. while ensuring fine surface of cut and cutting accuracy.
The clamps on the feed tale are suited for cutting irregular stock without need of additional fixtures to fix the workpiece.
Auxiliary support prevents workpiece deflection.
TRANSMISSION DEVICE
Employs precision ground rack with accuracy up to 0.02mm ( suitable for 3 and 6 meter feed travel )
Employs precision ground rack with accuracy up to 0.02mm ( suitable for 3 and 6 meter feed travel )
VACUUM OIL MIST UNIT
The vacuum oil mist unit employs vacuum generation principle to transfrom cutting fluid into oil mist for spraying. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The vacuum oil mist unit employs vacuum generation principle to transfrom cutting fluid into oil mist for spraying. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
SUITABLE FOR CUTTING VARIOUS MATERIALS
Aluminum, Brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
STANDARD EQUIPMENT
18'' sawblade x1pcs ( or specified size is available ) 、tool boxOPTIONAL EQUIPMENT
3 or 6 meters automatic feed deviceChoice of precision ground rack or ball screw
Dust collector and suction hose
Infeed roller conveyor
Sawblade
Automatic air blast device
| MODEL | JIH-455 A Type |
|---|---|
| Automatic Drive system | Ball screw (Servo motor drive) |
| Cutting
Capacity H x W |
120x120 , 100x200, 20x280 mm (Same as cutting capacity chart for JIH-18CD TYPE) |
| Max. feed distance ( one time ) | 500mm Unlimited recycle feed distance |
| Automatic feed accuracy | ±0.1mm |
| Cutting Length Display & Set Up | By touch screen |
| Saw spindle speed | 3200R.P.M. |
| Saw spindle motor | 7 1/2 HP ( optional 10HP ) |
| Hydraulic feed motor | 1HP |
| Servo motor | 500 w |
| Touch-sensing screen | 5.7" |
| Sawblade sizes | 18" x 1" bore |
| Air pressure | 4~6 kgs/cm² |
| Machine diamesions | 2500 x 1000 x 1850 mm |
| Packing diamesions | 2620 x 1120 x 2050 mm |
| Machine weight | 1400 / 1750 kgs |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
