JIH-455 D NC Automatic Sawing machine ( for cutting wood )
FEATURE
Automation feed, postioning, oil splashing and cutting
Horizontal align
allows material to lean on the baffle plate and mininmize forward movement which guarantees accurate cutting.
Cutting angle with 90°
Sawblade size:18" x1" hore
allows material to lean on the baffle plate and mininmize forward movement which guarantees accurate cutting.
Cutting angle with 90°
Sawblade size:18" x1" hore
AUTOMATIC POSITION SYSTEM SPECIFICATION :
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
Standard model
combined with a high speed cut off saw this effecitve device prepares the material for
combined with a high speed cut off saw this effecitve device prepares the material for
Graphical interface system
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
Automatic positioning system
Automatic positioning system the fast moving pusher reaches a maximumdistance of 60m/min with perfect positioning
Automatic positioning system the fast moving pusher reaches a maximumdistance of 60m/min with perfect positioning
Touch screen
the touch screen's function button allowspractical understanding thus bringing outthe best of this device
the touch screen's function button allowspractical understanding thus bringing outthe best of this device
STANDARD EQUIPMENT
18'' Sawblade x 1pcs. 、tool box x 1 pcOPTIONAL EQUIPMENT
1. Dust collector and suction hose2. Infeed and outfeed roller table
3. Sawblade
4. Automatic air blast system
5. Horizontal clampinhg
6. Horizontal align
7. Stopper
Depending on the working condition, the pusher can beused with different devises.
A : Automatic tracer system
B : Rolls of flat table
C : Baffle plate : 90°
D : Baffle plate : 45°
E : Baffle plate : Angle adjustalbe Range 90°- 30°
F : Gripper system
the following maximizes the customers choice of equipment raising production ability and satisfying the customers high quality reuests
Automatic feed length
| A | B | C | E | F | |
| length ( L ) |
3000mm | 4000mm | 5000mm | 6000mm | 7000mm |
feed |
2500mm | 3500mm | 4500mm | 5500mm | 6500mm |
| MODEL | JIH-455D |
|---|---|
| Applicable machine | JIH-18C,D Type Other model in JIH - 18C series and JIH -24 series also can be equipped with JIH - AUTO 3000 to convert it into an automatic feed machine. |
| Cutting Capacity | H120 x W240mm ( same as cutting capacity chart for model JIH - 18CD ) |
| Spindle Motores | 7.5HP |
| Sawblade size | 18" x 1' bore |
| Table height from floor | 860mm |
| Air pressure | 6 - 8kgs/cm² |
| Touch-sensing screen | 5.7" |
| Servo motor | 400 w |
| Max. memory | 100 sets |
| Positioning speed | 20~50 M / min |
| Positioning accuracy | ±0.15 mm |
| Max. holding force | 50 kgs |
| Max. pushing force | 50 kgs |
| Max. feed length | Opt. length 3~7M (Normal length 2.5~6.5M) |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
