HOME > PRODUCTS

Cut-off saws (Semi Automatic)

JIH-455 D NC Automatic Sawing machine

FEATURE
Automation feed, postioning, oil splashing and cutting
	Horizontal align allows material to lean on the baffle plate and mininmize forward movement which guarantees accurate cutting. Cutting angle with 90° Sawblade size:18" x1" hore
	VACUUM OIL MIST UNIT The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
	AUTOMATIC POSITION SYSTEM SPECIFICATION : Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
	Standard model combined with a high speed cut off saw this effecitve device prepares the material for
	Graphical interface system Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
	Touch screen the touch screen's function button allowspractical understanding thus bringing outthe best of this device
Automatic positioning system Automatic positioning system the fast moving pusher reaches a maximumdistance of 60m/min with perfect positioning

STANDARD EQUIPMENT

18'' Sawblade x1pcs. ( specified size is available) 、tool box x 1 pc

OPTIONAL EQUIPMENT

1. Dust collector and suction hose

2. Infeed and outfeed roller table

3. Sawblade

4. Automatic air blast system

5. Horizontal clampinhg

6. Horizontal align

7. Stopper

Depending on the working condition, the pusher can beused with different devises.

A : Automatic tracer system
B : Rolls of flat table
C : Baffle plate : 90°
D : Baffle plate : 45°
E : Baffle plate : Angle adjustalbe Range 90°- 30°
F : Gripper system

the following maximizes the customers choice of equipment raising production ability and satisfying the customers high quality reuests

8. Automatic feed length :

	A	B	C	E	F
length ( L )	3000mm	4000mm	5000mm	6000mm	7000mm
feed ( L1 )	2500mm	3500mm	4500mm	5500mm	6500mm

MODEL	JIH-455D
Applicable machine	JIH-18C,D Type Other model in JIH - 18C series and JIH -24 series also can be equipped with JIH - AUTO 3000 to convert it into an automatic feed machine.
Cutting Capacity	H120 x W200mm ( same as that showon cutting capacity chart for model JIH - 18C/D )
Spindle Motor	7.5HP
Sawblade sizes	18" x 1' bore
Table height from floor	860mm
Air pressure	6 - 8kgs/cm²

Automatic position system specification
Touch-sensing screen	5.7"
Servomotor	400w
Frequently used memory module	100 sets
Positioning Speed	20-60 m/min
Positioning Accuracy	?0.10mm
Max. holding force	50kgs
Max. Pushing force	50kgs
Max. feed length	opt. length 3~7 m (Normal length 2.5~6.5m)

*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.