• HOME > PRODUCTS

Cut-off saws (Semi Automatic)

JIH-24 Sawing machine ( for cutting wood )

 

FEATURE
To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously. While cutting, the oil mist splashes automatically for cooling and lubrication. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off. The machine permits 90 and 45 degree cutting.
	Adjustable clamping speed. Adjustable cutting height. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.
	The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those Atyped machine CHIP OUTLET PORT The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

SUITABLE FOR CUTTING VARIOUS MATERIALS
Wood

STANDARD EQUIPMENT
24'' Sawblade x 1pc ( or specified size is available ) 、handle changing sawblade

OPTIONAL EQUIPMENT
infeed and outfeed roller conveyor、dust outlet、dust hood、dust collector、guard、Horizontal clamping、Hydraulic feed system

MODEL	JIH-24 C Type
Cutting Angle	90 ° or 45 °
Spindle speed	2000R.P.M.
Sawblade size	24"x1"bore
Table area	660x700mm
Table height from floor	830mm
Motor	7 1/2 HP
Air pressure	4-6 kgs/cm²
Conveyor Length (opt.)	1-7 M
Machine diamesions ( LxWxH )	1310x830x1460mm
Packing diamesions ( LxWxH )	1430x950x1660mm
N.W. / G.W.	480 / 580kgs

*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.