JIH-18C F Type sawing machine
FEATURE
- To operate the machine, simply treadle on the foot switch, the machine wil automatically perform clamping and cutting for convenient operation.
- Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
- Cutting feed is driven by hydraulic power unit for extremly stable cutting speed.
- Adjustable clamping speed.
- Adjustable cutting height.
- Adjustable cutting speed.The operator may adjust clamping height and speed a cutting height and speed according to work piece size and thickness for saving wait time.
- Accurately controlled oil mist system greatly improves lubrication and cooling effect, while reducing trouble to a minimum.
- Hydraulic feed system
- The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those Atyped machine
- CHIP OUTLET PORT The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.
VACUUM OIL MIST UNIT
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The sawblade spindle is heat treated and plated for greatly increasing the spindle life
SUITABLE FOR CUTTING VARIOUS MATERIALS Stell
Aluminum, Brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
STANDARD ACCESSORIES
18'' Sawblade x1、Sawblade、Horizontal clampsOPTIONAL EQUIPMENT
infeed and outfeed roller conveyor、dust outlet、dust hood、dust collector、guard、Horizontal clamping、Hydraulic feed system| MODEL | JIH-18C F Type |
|---|---|
| Cutting Angle | 90° or 45° |
| Spindle speed | 800R.P.M. |
| Sawblade sizes | 16" or 18" bore |
| Table area | 640 x 380 mm |
| Table height from floor | 860 mm |
| Motor | Spindle motor 5HP(8HP) Hydraulic motor 1HP |
| Air pressure | 4-6 kgs/cm2 |
| Conveyor Length (opt.) | 1-7 M |
| Machine
diamesions ( LxWxH ) |
1100 x 800 x 1620 mm |
| Packing diamesions ( LxWxH ) |
1220 x920 x 1820 mm |
| N.W. /G.W. | 450 / 550kgs |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
