Woodworking machine

JIC-8B Craving Machine

FEATURE

• Employs a frequency inverter to control the high frequency motor that drives the spindle for carving operations. It is suitable for carving surfaces. and three-dimensional artistic products etc.
• Wide spindle speed 9000、12000 RPM for choice. Provides choice of 2, 4, 6, 8 and 12 spindle configuration a VCD describing the machine operation is available upon cutting capacity and length can be specified by customers request.
• Cutterhead can be adjusted in vertical, cross longitudinal directions. Carve angle can be set in the range of 30 - 120.
• Cutter of double head 1s used 1n the wide spindle .It can se1e one head of the cutter types according to the sample profile.
• The procedure of producing rough model by this machine is abouts 10 times faster then by man.
• The products made by machine will not be transformed in addition, this machine is firm and durable in using and can be operated easily.

OPERATION INSTRUCTIONS

The operator fixes the template on the middle shaft,. both ends. Install the cutter on the spindle. The opei along the template for 360 carve capacity.

OPTIONAL EQUIPMENT

(D)		45mm	36mm	30mm	24mm	18mm	12mm	9mm	4.5mm
(L)mm	105mm	105	105	105	105	105	105	105	105
	120mm			120	120	120	120	120	120
	150mm				150	150	150	150

MODEL	2-AXIS	4-AXIS	6-AXIS	8-AXIS
Process in Size	300mm	300mm	300mm	300mm
Process in Length	900mm	900mm	900mm	900mm
Using Motor	Main axis 1/2HPx2 Movement of working objects 1HPX1	Main axis 1/2HPx4 Movement of working objects 1HPX1	Main axis 1/2HPx6 Movement of working objects 2HPX1	Main axis 1/2HPx8 Movement of working objects 2HPX1
N.W.	1400kgs	1700kgs	1900kgs	2100kgs
G.W.	1700kgs	2000kgs	2150kgs	2500kgs
Mechine diamesions	2160x2000 x1700(mm)	2700x2000 x1700(mm)	3060x2000 x1700(mm)	3660x2000 x1700(mm)
Packing diamesions	2285x2140 x1580(mm)	2825x2140 x1580(mm)	3185x2140 x1580(mm)	4260x2230 x2040(mm)
Remark