Woodworking machine
JIC-8A Craving Machine
| FEATURE |
- It is suitable for carving surfaces. and three-dimensional
artistic products etc.
- Cutterhead can be adjusted in vertical, cross longitudinal
directions. Carve angle can be set in the range of 30 - 120.
- Provides choice of 2, 4, 6, 8 and 12 spindle configuration
a VCD describing the machine operation is available upon cutting
capacity and length can be specified by customers request.
- The procedure of producing rough model by this machine is
abouts 10 times faster then by man.
- The products made by machine will not be transformed in
addition, this machine is firm and durable in using and can
be operated easily.
|
| OPERATION
INSTRUCTIONS |
| The operator fixes the template on
the middle shaft,. both ends. Install the cutter on the spindle.
The opei along the template for 360 carve capacity. |
| OPTIONAL
EQUIPMENT |
 |
| (D) |
45mm |
36mm |
30mm |
24mm |
18mm |
12mm |
9mm |
4.5mm |
| (L)mm |
105mm |
105 |
105 |
105 |
105 |
105 |
105 |
105 |
105 |
| 120mm |
|
|
120 |
120 |
120 |
120 |
120 |
120 |
| 150mm |
|
|
|
150 |
150 |
150 |
150 |
|
| MODEL |
2-AXIS |
4-AXIS |
6-AXIS |
| Process in Size |
450mm |
360mm |
300mm |
Process
in Length |
900mm |
900mm |
900mm |
| Using Motor |
| Main axis |
2HPx2 |
| Movement of working objects |
2HPX1 |
|
| Main axis |
2HPx2 |
| Movement of working objects |
2HPX1 |
|
| Main axis |
2HPx2 |
| Movement of working objects |
2HPX1 |
|
| Turing Times of The Main Aais |
7000R.P.M. |
7000R.P.M. |
7000R.P.M. |
| Weight |
1600kg |
2000kg |
2300kg |
Volume
( L x W x H ) |
2160x2000x1300(mm) |
2700x2000x1300(mm) |
3060x2000x1300(mm) |
| Weight to Load Into Boxes |
2000kg |
2500kg |
2800kg |
| Volume to Load in Boxes |
2285x2140x1580(mm) |
2825x2000x1300(mm) |
2185x2140x1580(mm) |
| Remark |
|
|
|
| MODEL |
8-AXIS |
8-AXIS |
12-AXIS |
| ProcessIn Size |
240mm |
300mm |
200mm |
| Process in Length |
900mm |
900mm |
900mm |
| Using Motor |
| Main axis |
2HPx4 |
| Movement of working objects |
2HPX1 |
|
| Main axis |
2HPx4 |
| Movement of working objects |
2HPX1 |
|
| Main axis |
2HPx4 |
| Movement of working objects |
2HPX1 |
|
| Turing Times of The Main Axis |
7000R.P.M. |
7000R.P.M. |
7000R.P.M. |
| Weight |
2400kg |
2800kg |
3000kg |
Volume
( L x W x H ) |
3180x2000x1300(mm) |
3660x2000x1300(mm) |
3660x2000x1300(mm) |
| Weight to Load in Boxes |
3100kg |
3600kg |
3800kg |
| Volume to Load in Boxes |
3305x2140x1580(mm) |
3785x2140x1580(mm) |
3785x240x1580(mm) |
| Remark |
|
|
|
*All specifications, dimensions and design characteristics
shown in this catalogue are subject to change without notice.
|
|
